Model 270 Full Specifications

Model 270 French Bread/Bun and Bagel Slicer
Specifications
Capacities: Electrical Requirements:
Volume: Motor: 1/2 hp, 115 volt/ 1- phase/ 60 cycle
Slices as fast as operator can feed the slicer 8.7 amps
  1,725 rpm
Complete Cut: On/Off Switch with built in Overload Protection
Maximum: 5-1/4" (133.3 mm) wide  
1/2" to 1-1/2" (12.7 mm - 38.1 mm) from bottom Special Requirements also available in:
  220-240 volts / 1 phase / 50 cycle
Adjustable for hinged cut on product up to 6" (152.4 mm) wide and 3" (76.2 mm) thick  
  Construction:
Dimensions: Stainless Steel food contact parts
Length: 34" (86.89 mm) White Powder Coat non-food contact parts
Width: variable 18-20 7/8" (457.2 - 531.6 mm)  
Height: 24-1/2" (622.3 mm) Cutting Blade:
Counter Space Required: Replacement Blade Part Number:
13" x 14" (330.2 x 355.6 mm) (approx.) A4-037-0002
  12.5" (317.5 mm) Blade Diameter
Shipping Wt: 95lb. (43.09 kg) 5/8" (15.875 mm) Center Bore
Operation Weight: 70 lb. (31.75 kg) Stainless Steel

Due to Dutchess' policy of continual product improvement, product specifications are subject to change without notice.